Complementing the Ninja ZX-10R and track-focused Ninja ZX-10RR, Kawasaki proudly introduces a new high-grade edition to its supersport line-up. The Ninja ZX-10R SE features Kawasaki’s new, highly advanced electronic suspension. Both on the
|Type||4-stroke, In-Line Four|
|Bore and stroke||76.0 x 55.0 mm|
|Valve system||DOHC, 16 valves (4 valves per cylinder)|
|Fuel system||Fuel injection: 47 mm x 4 with dual injection|
|Lubrication||Forced lubrication, wet sump with oil cooler|
|Front: type||Dual semi-floating ø330 mm Brembo discs|
|Front: calipers||Dual radial-mount, Brembo M50 monobloc, opposed 4-piston, with ABS|
|Rear: type||Single 220 mm disc|
|Rear: calipers||Single-bore pin-slide with ABS|
|Overall length||2,090 mm|
|Overall width||740 mm|
|Overall height||1,145 mm|
|Ground clearance||145 mm|
|Seat height||835 mm|
|Curb mass**||208 kg|
|Fuel capacity||17 litres (3.7 gal.)|
|Primary reduction ratio||1.681 (79/47)|
|Gear ratio: 1st||2.600 (39/15)|
|Gear ratio: 2nd||2.214 (31/14)|
|Gear ratio: 3rd||1.944 (35/18)|
|Gear ratio: 4th||1.722 (31/18)|
|Gear ratio: 5th||1.550 (31/20)|
|Gear ratio: 6th||1.391 (32/23)|
|Final reduction ratio||2.294 (39/17)|
|Clutch||Wet multi-disc, manual|
|Type||Twin spar, cast aluminium|
|Wheel travel: front||120 mm (4.7 in.)|
|Tire: front||120/70-ZR17M/C (58W)|
|Wheel travel: rear||114 mm (4.5 in.)|
|Tire: rear||190/55-ZR17M/C (75W)|
|Trail||107 mm (4.2 in.)|
|Steering angle (left/right)||27º/27º|
|Suspension, front||Horizontal Back-link, BFRC lite gas-charged shock with piggyback reservoir, KECS-controlled compression and rebound damping, manual spring preload adjustability, and top-out spring|
|Suspension, rear||43 mm inverted Balance Free Front Fork with external compression chamber, KECS-controlled compression and rebound damping, manual spring preload adjustability, and top-out springs|
Factory Limited Warranty Owner's Warranty Guide
This model comes with 12 months factory limited warranty.
Kawasaki keeps the good times rolling with unlimited kilometers/hours of usage. We have you covered with our nationwide, Kawasaki dealer network. Visit any authorized Kawasaki dealer (for this product line) throughout Canada and continental USA for factory warranty coverage.
Click “Owner’s Warranty Guide” for full details regarding Kawasaki’s factory limited warranty coverage.
Kawasaki Protection Plus Learn More
Kawasaki’s own Kawasaki Protection Plus (KPP) goes the distance with available two, three, and four years of unlimited kilometers/hours additional coverage on top of the original Kawasaki limited warranty. That’s up to seven years total coverage depending on the base warranty term!
Feel secure knowing that Kawasaki Protection Plus repairs are performed only at authorized Kawasaki dealers (for this product line) throughout Canada and continental USA using only Kawasaki genuine parts.
3 Years Kawasaki Protection Plus - Ninja 300
Purchase a select new Kawasaki NOW and get an additional 3 years of Kawasaki Protection Plus. Visit your local Kawasaki dealer today for complete details and get moving right now.
Ride away with more cash in your pockets with MEGA Cash Credits.
5.99% Financing 72 Months
Take advantage of our Special Retail Financing offer for as little as 5.99% for 72 months. Visit your local Kawasaki dealer today for complete details and get moving - for less - right now.
Power Modes (with variable middle mode)
Power Modes allow available power and throttle response to be selected to suit conditions. On the supersport Ninja ZX-10R, three modes are available: Full, Low (which limits power to about 60% of Full) and Middle mode, which falls between the two.
More than a simply bisecting the Full and Low mode power curves, in Middle mode performance characteristics vary depending on engine speed and throttle position. At less than 50% throttle application, engine performance is essentially the same as in Low mode. However, opening the throttle past 50% allows performance up to that of Full power to be accessed. This advanced engine management system allows mild engine character for normal riding situations, with the option to tap into greater power for a quick burst of acceleration.
Variable Middle Mode offers riders the ability to alter engine performance and delivery by conscious use of throttle control (either for ease of control when riding in the city, or for greater response when the rider calls for quick acceleration). This kind of technology allows supersport machines to be enjoyed in a broader range of situations.
Launch Control Mode
In motocross racing, getting a good start is critical. A few tenths of a second can make the difference between getting the holeshot or not. In slippery conditions, getting the maximum drive from a motocrosser requires precise control of the both the clutch and throttle.
Launch Control Mode helps riders get a good start by complementing high-level technique with engine management. Featured on a mass-production motocrosser for the first time on Kawasaki's KX450F, the system activates a separate engine map designed to get a more efficient start off the line. The system is designed to the same specifications as that used by our factory racers competing in the AMA Supercross and Motocross championships.
Launch Control Mode is activated simply by pressing the button on the handlebar. The Launch Control map slightly retards ignition timing to help tame the engine's strong torque and reduce wheel spin off the start. Launch Control Mode is only active in the first two gears off the start, disengaging and returning to the standard engine map automatically once the rider shifts into 3rd gear. The system gives riders a great advantage when lining up at the gate and puts them in a better position to win.
Horizontal Back-link Rear Suspension
Compared to Kawasaki's traditional Uni-Trak rear suspension, which mounts the shock unit vertically, with Horizontal Back-link rear suspension, the shock unit is almost horizontal. Kawasaki's original suspension arrangement locates the shock unit very close to the bike's centre of gravity, greatly contributing to mass centralisation. And because there is no linkage or shock unit protruding beneath the swingarm, this frees up space for a larger exhaust pre-chamber (an exhaust expansion chamber situated just upstream of the silencer). With a larger pre-chamber, silencer volume can be reduced, and heavy exhaust components can be concentrated closer to the centre of the bike, further contributing to mass centralisation. The result is greatly improved handling.
Another benefit is that the shock unit is placed far away from exhaust heat. Because it is more difficult for heat from the exhaust system to adversely affect suspension oil and gas pressure, suspension performance is more stable. Horizontal Back-link rear suspension offers numerous secondary benefits like this.
Economical Riding Indicator
Using high-precision electronic control for engine management, Kawasaki models can achieve a high level of fuel efficiency. However, fuel consumption is greatly affected by throttle use, gear selection, and other elements under the rider's control. The Economical Riding Indicator is a function that indicates when current riding conditions are consuming a low amount of fuel. The system continuously monitors fuel consumption, regardless of vehicle speed, engine speed, throttle position and other riding conditions. When fuel consumption is low for a given speed (i.e. fuel efficiency is high), an "ECO" mark appears on the instrument panel's LCD screen. By riding so that the "ECO" mark remains on, fuel consumption can be reduced.
While effective vehicle speed and engine speed may vary by model, paying attention to conditions that cause the "ECO" mark to appear can help riders improve their fuel efficiency – a handy way to increase cruising range. Further, keeping fuel consumption low also helps minimise negative impact on the environment.
S-KTRC: Sport - Kawasaki Traction Control
S-KTRC, Kawasaki's original predictive traction control, uses the same base technology as the Kawasaki works machines that competed in MotoGP, the pinnacle of motorcycle racing. This technology continually controls the rear wheel slip that occurs when power is applied, ensuring optimal acceleration. In general, maximum forward drive requires a certain amount of slip (usually between 20-30% slip ratio, i.e. the rear wheel is turning 20-30% faster than the front). To ensure the most effective transfer of power to the tarmac, S-KTRC monitors the slip ratio in real time, and governs engine power delivery to optimise rear wheel traction.
S-KTRC monitors a number of parameters, including front and rear wheel speed, engine rpm and throttle position. Conditions are confirmed every 5 milliseconds, at which time the system looks at each of the parameters as well has how much they are changing (i.e. their rate of change). This unique Kawasaki method makes it possible to interpolate and predict how the bike will behave in the next instant.
Unlike 1-mode KTRC, which cuts power as soon as rear slip is detected to allow rear traction to be regained, S-KTRC uses minimal power drops to ensure the slip ratio for optimal traction is maintained. Because its goal is to maximise acceleration, as long as sufficient forward motion is observed, this sport riding system will allow power wheelies as the bike comes out of corners.
Kawasaki Engine Brake Control
The Kawasaki Engine Brake Control system allows riders to select the amount of engine braking they prefer. When the system is activated, the engine braking effect is reduced, providing less interference when riding on the circuit.
Electronic Throttle Valves
Kawasaki’s fully electronic throttle actuation system enables the ECU to control the volume of both the fuel (via fuel injectors) and the air (via throttle valves) delivered to the engine. Ideal fuel injection and throttle valve position results in smooth, natural engine response and the ideal engine output. The system also makes a significant contribution to reduced emissions.
Electronic throttle valves also enable more precise control of electronic engine management systems like S-KTRC and KTRC, and allow the implementation of electronic systems like KLCM, Kawasaki Engine Brake Control, and Cruise Control.
IMU - Enhanced Chassis Orientation Awareness
The strength of Kawasaki’s cutting-edge electronics has always been the highly sophisticated programming that, using minimal hardware, gives the ECU an accurate real-time picture of what the chassis is doing. Kawasaki’s proprietary dynamic modelling program makes skilful use of the magic formula tyre model as it examines changes in multiple parameters, enabling it to take into account changing road and tyre conditions.
The addition of an IMU (Inertial Measurement Unit) enables inertia along 6 DOF (degrees of freedom) to be monitored. Acceleration along longitudinal, transverse and vertical axes, plus roll rate and pitch rate are measured. The yaw rate is calculated by the ECU. This additional feedback contributes to an even clearer real-time picture of chassis orientation, enabling even more precise management for control at the limit.
With the addition of the IMU and the latest evolution of Kawasaki’s advanced modelling software, Kawasaki’s electronic engine and chassis management technology takes the step to the next level – changing from setting-type and reaction-type systems to feedback-type systems – to deliver even greater levels of riding excitement.
KQS: Kawasaki Quick Shifter
Designed to help riders maximise their acceleration on the circuit by enabling clutchless upshifts with the throttle fully open, KQS detects that the shift lever has been actuated and sends a signal to the ECU to cut ignition so that the next gear can be engaged without having to use the clutch. For some models, when a race kit ECU is used, clutchless downshifts are also possible.
KECS (Kawasaki Electronic Control Suspension)
KECS adapts to road and riding conditions in real time, providing the ideal amount of damping called for by electronically adjusting damping to suit vehicle speed and suspension stroke speed. Deceleration is also taken into account, which allows the system to help manage pitching that may occur during braking.
Control via solenoid valve with direct actuation enables an extremely quick reaction time, making KECS ideal for sport riding applications, where natural feeling is crucial to feeling at one with the bike. Built-in stroke sensors on both the fork and rear shock provide real-time stroke speed and compression information. Input from the sensor coils to the KECS ECU is complemented by information provided by the IMU (acceleration/deceleration) and the FI ECU (vehicle speed). The KECS ECU then directs current to the solenoids to adjust damping as required by the situation.
Selectable modes allow riders to choose softer or firmer base settings.
Best kept secret
* The Manufacturer's Suggested Retail Price does not include freight, pre-delivery inspection or applicable taxes. The final price is at the discretion of the dealer. Prices and Specifications are subject to change without prior notice. The amount indicated as "Your price" may include an optional instant Mega Cash credit that is deducted from the manufacturer's suggested retail price before taxes. This promotion is time limited and certain conditions will apply. See your dealer for complete details. Offer not available on financed purchases and cannot be combined with any other special offers. The final price is at the discretion of the dealer. Prices and Specifications are subject to change without prior notice.
** Includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90% of capacity) and tool kit (if supplied)
† Mega Cash noted with the MSRP, is a Special Offer that cannot be combined with any other special offer. Customers can choose a different current Special Offer, but they will be charged the full MSRP listed price and not the Mega Cash price.
‡ Power / Torque figures measured at the crankshaft.
The specifications mentioned here apply to and have been achieved by production models under standard operating conditions. We intend only to give a fair description of the vehicle and its performance capabilities but these specifications may not apply to every machine supplied for sale. Kawasaki Heavy Industries, Ltd. reserves the right to alter specifications without prior notice. Equipment illustrated and specifications may vary to meet individual markets. Available colours may vary by market.